Directions for use
Please read the following steps in detail:
1.Download the "V380 Pro" APP on your phone
2.Insert the included 32G SD card(Please format the SD card the first time you use it)
3.Connect the power supply and long press the power button for 5 seconds
4.Long press the "MODE" reset button for 5 seconds, and the indicator light will turn to red and blue light. After 30 seconds, the light color will turn to red light. Then, it means that the camera reset is successful.
1.Short-range connection(Connection distance: indoor: < 10M, outdoor: < 15M)
1).Open the list of "WiFi" and connect to " MV******** " WiFi, such as MV35804985. Please wait for about 1 minute after connecting to WiFi
2).When the phone is connected to the camera WiFi, open the phone APP (V380 Pro), click "Experience", and then automatically add the device by pull-down refresh in the "Add Device" page.
3).Click on the monitoring page and set the user and password
2.The remote connection
1).Register your account and log in (you need an account for remote connection)
2).Click the Settings button on the right and select "Replace Device Network"
3).After entering the interface, click "Switch Device to Router Mode" below the interface.
4).Select "Click here to change WIFI", select your WIFI and enter your password.
5).After the setting is completed, the device will automatically switch from red light to blue light, then the device will be in remote mode (the process of connecting to remote needs to wait about two minutes).
